Directions for Use :
1. Surfaces to be bonded should be dry, clean and free from oils.
2. Mix Part A (2 parts) with Part B (1 part) thoroughly around 5 minutes. Make sure both components are mixed homogeneously.
3. The mixed components should be used within 30 minutes as the adhesives will begin to cured in 2-3 hours depending on weather conditions.
4. Allow 72 hours for the adhesive to achieve maximum strength.
Caustions: Do not inhale or take internally. Avoid contact with eyes. Upon eye contact, flush immediately with plenty of water for 15 minutes. For skin contact, wash thoroughly with soup and water. Keep out of reach of children.
- Ready to Use
- Permanent Bonds.
- Non Shrink
- Can be Drilled